Wireless Lighting: A Toy Or The Ultimate Garden Accessory?

Client Software and Adapter

Any client computer, laptop or wireless device with a compatible wireless client adapter allows connectivity with an access point. The client adapter is a radio transmitter with firmware that supports any of 802.11a/b/g signaling. That is needed before the device can associate and authenticate with the access point. Some access points have a no client mode that doesn’t allow any association 433 mhz remote control from clients extending network distance. Client wireless software included with the adapter must be implemented with specific Windows platforms. The client adapter will be integrated with the laptop, PCMCIA or desktop PCI bus . They will support specific wireless standards, antenna characteristics, WiFi certification, WDS, network range and security. The wireless manufacturer software must be implemented for all available features. The following is a list of some client adapter configured settings.

Access Point (AP)

As the name suggests an AP (access point) allows connectivity between the wireless client or wireless device and the wired network. The AP takes wireless data packets from a client and translates them to standard Ethernet data frames before transmitting across the wired network. Standard category 5 twisted pair cabling will connect the AP point Ethernet port with a catalyst switch Ethernet port. The maximum distance between access point and network switch is 100 meters standard with Ethernet design.

WLAN Controllers

Wireless designs with hundreds of root APs on an enterprise network will sometimes deploy wireless LAN controllers. The design specifies lightweight APs connecting to a network switch. The 4404 WLAN controller device acts as a hub connecting 4 network switches supporting 100 access points. Cisco wireless control system (WCS) wireless network management software is sometimes deployed with WLAN controller design for planning, configuring and optimizing the network.

Power Injector

Cisco access points have a variety of power options such as AC adapters, power over Ethernet and power injectors. The placement of APs is such that in some situations an AC power outlet isn’t available. Should your Ethernet switch not support power over Ethernet, an option such as power injectors extends the distance from an AC outlet. Distances of 1.24 miles are available with a fiber optic media converter.

Power over Ethernet

Cisco access points can be deployed with power over Ethernet (PoE) should the network switch modules support that feature. The distance of 300 feet is the same with Cisco prestandard and 802.3af. The Cisco prestandard use Cat 5 cabling pins 1, 2, 3, 6 for powering devices while 802.3af uses 1, 2, 3, 6 with 10/100/1000BaseT signaling and 4, 5, 7, 8 with 10/100BaseT. Select a network switch module with the power over Ethernet standard your AP has implemented and has a power wattage rating per port for your specific devices. The network switch power supply should be upgraded to support additional power draw from multiple devices. Deploying power over Ethernet will decrease implementation costs with deployment of IPT, wireless and Gigabit. See network switch documents at Cisco web site for information on what network switching modules support PoE and wattage ratings. 802.3af defines powered device class 2 at 3.84W – 6.49W and class 3 at 6.49W – 12.95W.